We are hiring!

Apply now

Need help? Ask an expert

01540 673 648

My lightbox (0)
Add products to lightbox to review choices & request samples

What is Chevron Flooring?

Chevron flooring, sometimes called French Herringbone, is a laying style commonly used with parquet boards. Russwood's Chevron flooring is supplied pre-cut at a 45 degree angle for both left and right components, and tongue and grooved on the long side of the boards to create a 'V' shape pattern. Chevron boards are solid oak and available either pre-finished or unfinished.

Pre-finished Chevron Flooring

All our pre-finished chevron boards are supplied pre-finished with Osmo Polyx® Hardwax oil in a choice of 9 different colours – from white, through honeyed golden tones to rich shades of ebony. Before being oiled, boards can be smoked; this process adds rich, deep variations of colour to the palette, providing another 6 colour options. View these colours by referring to 'brushed' and '17th Century' options within our Flooring Colour Guide.

Our pre-finished Chevron flooring comes in both brushed and 17th century effect:

  • Brushed Style is created by wire brushes pulling out the softer spring wood, exposing the harder summer wood, thus accentuating the grain and creating a beautifully textured surface
  • 17th Century Style chevron flooring is tumbled to randomly distress the surface and bevel of the blocks to create beautifully antiquated effect

Unfinished Chevron Flooring

Our unfinished chevron flooring requires a light sand after fitting before being finished on site by a professional and will create a beautiful and timeless look for any domestic or commercial project. 

What kind of finishes do you recommend for unfinished chevron?

We recommend finishing your unfinished chevron floor with an Osmo Polyx® Hardwax Oil. Doing so will provide long-lasting protection whilst increasing the floor's durability and stain-repelling properties. Due to the depth of penetration achieved, Osmo Polyx® Hardwax-Oil preserves the character and appearance of the wood and ensures that your floor is easy to clean and requires minimal maintenance. Osmo Polyx® Oil is widely regarded as the highest quality Hardwax-Oil on the market and is available to buy through our online shop. For a list of Osmo oil colours available please go to the flooring colour guide.

The alternative to hardwax-oil is a lacquer or oil-based system, which in our experience do not protect or enhance the natural beauty of the wood to the same extent as a hardwax-oil. In addition, chipping, scratching and cracking have traditionally caused issue when using these systems; issues which are not easily rectified without recoating the entire floor space. For further information on hardwax oil versus lacquer, and instructions on how to oil and maintain your floor, please go to Technical Support.

Chevron Grading

European Oak is widely considered to be the finest available worldwide due to it’s attractive colouring, figuring and durability properties. All Russwood oak flooring originates from the same highest quality raw material, making grade selection purely an aesthetic preference. 

The Chevron flooring range is available in Character, Prime and Prime Plus grades, all of which feature boards that are carefully hand graded and selected to your specification, as outlined below.

Character Grade

Ideal for naturally inspired interiors. The beautifully prominent figuring - a mixture of heartwood, sapwood and large, hand-filled and brushed knots - illustrates the true, rustic nature of this premium timber flooring.

Prime Grade

Clean, contemporary and incredibly stylish. Each board has been carefully selected to ensure that the beautiful figuring of the wood is highlighted but, only small pre-filled and sanded knots are present.

Prime Plus Grade

In addition, we offer a Prime Plus grade where only exceptional boards with occasional pin knots are selected from our prime grade. This is a truly special product which is subject to raw material availability.

What sizes are available?

Chevron is available in solid oak and comes in the following standard sized blocks;







What is the expected thermal performance when using underfloor heating?

TOG Rating:

20mm 1.32 TOG

Heat Transfer:

20mm 0.156 Wm2k

Can I order skirtings and stair nosings to match my floor?

Yes. We can supply a range of stair treads, stair nosings, skirtings, thresholds and tables to match floors, helping unify spaces within your flooring project. See more on our skirtings and stair material page.

In addition, our flooring is dried to 8-10% moisture content (+/-2%), making it perfect for other internal joinery applications such as wall cladding.


Prices for our Chevron flooring start at £64.20 per m2 excluding VAT.

Ask an Expert

Our floors are bespoke and made to order - we don't stock standard ranges. We can help and guide your choice, with expert staff who are knowledgeable, experienced and very helpful - call us on 01540 673648.